FPC Mainboard PCB na-agbanwe agbanwe

  • Ọnụ ego FOB:US $ 0.5 - 9,999 / akụkụ
  • Ọnụ ọgụgụ nke Min.1 Iberibe/Iberibe
  • Ikike inye:10000 Iberibe/Iberibe kwa ọnwa
  • Port:Shenzhen
  • Usoro ịkwụ ụgwọ:L/C,D/A,D/P,T/T

Nkọwa ngwaahịa

Mkpado ngwaahịa

Dị mfeBoard PCB na-agbanwe agbanwe

1. Okwu Mmalite nkeDị mfeBoard PCB na-agbanwe agbanwe

Fastline sekit nwere ike ịnye ọrụ mgbakọ sekit sekit e biri ebi na ntugharị akụkụ.Maka turnkey zuru oke, anyị na-ahụ maka usoro ahụ dum, gụnyere nkwadebe nke bọọdụ sekit e biri ebi, ịzụ ahịa nke akụrụngwa, nleba anya n'ịntanetị, nleba anya na-aga n'ihu nke ịdị mma na mgbakọ ikpeazụ.Ebe maka ntụgharị ihu akụkụ, onye ahịa nwere ike ịnye PCBs na ụfọdụ akụrụngwa, akụkụ ndị ọzọ ga-ejikwa ya.

Atụmatụ-Uru Ngwaahịa Anyị

1. N'ime 10 afọ ahụmahụ emeputa na PCB Mgbakọta na PCB ubi.
2. Nnukwu ọnụ ọgụgụ nke imepụta na-eme ka n'aka na ọnụ ahịa ịzụrụ gị dị ala.
3. Advanced mmepụta akara na-ekwe nkwa kwụsiri ike mma na ogologo ndụ ogologo.
4. Mepụta ihe fọrọ nke nta ka ọ bụrụ PCB ọ bụla dị ka ihe achọrọ.
5. 100% ule niile ahaziri PCB ngwaahịa.
6. One-nkwụsị Service, anyị nwere ike inyere ịzụta components.

Ọkọlọtọ Flex Materials:

Polyimide (Kapton) 0.5 mil ruo 5 mil (.012mm - .127mm)
Ihe ndabere ọla kọpa na-enweghị eriri 1 mil ruo 5 mil
Ọkụ na-egbochi ọkụ laminate, ihe ndabere, na mkpuchi
Epoxy Laminate na Prepreg na-arụ ọrụ dị elu
Polyimide laminate na Prepreg na-arụ ọrụ dị elu
Ngwa UL na RoHS na-akwado arịrịọ
Nnukwu Tg FR4 (170+ Tg), Polyimide (260+ Tg)
Ọla kọpa:
1/3 oz.- .00047 n'ime. (.012mm) - adịkarịghị eji
1/2 oz.- .0007 n'ime. (.018mm)
1 oz.- .0014 inch (.036mm)
2 oz.- .0028 inch (.071mm)
Ihe mkpuchi solder: ahaziri
Mkpuchi Polyimide: 0.5 mil ruo 5 mils Kapton (.012mm - .127mm)
ya na 0.5 ruo 2 mil nrapado (.012mm - .051mm)
LPI na LDI Mgbanwe Soldermasks

Ike PCB Flex

Ụgwọ nke ụlọ ọrụ Fastline Circuits Co., Limited
Teknụzụ FPC na ike
Ihe onwunwe FR4, Polyimide / Polyester
Ọnụ Mgbanwe: 1 ~ 8L;Isi ike-Mgbanwe: 2 ~ 8L
Ọkpụrụkpụ osisi Min.0.05mm;Oke.0.3mm
Ọkpụkpụ ọla kọpa 1/3 oz - 2 oz
Nha Drill CNC (Max) 6.5mm
Nha CNC Drill (Nkeji) Mgbanwe: 0.15mm
Nkwenye ebe oghere ± 0.05mm
Nha Mkpuchi Mkpuchi (Nkeji) 0.6mm
Oghere ga-ekpuchi windo mepere emepe (Nkeji) 0.15mm
Ogologo Ahịrị Obere / Oghere 0.1 / 0.1mm
Ọkpụrụkpụ ọla kọpa na mgbidi oghere Mgbanwe: 12-22μm
Nha nke mpempe akwụkwọ φ0.2mm
Etch ndidi Nkwekọrịta obosara ahịrị emechara ± 20%
Nnabata Ndebanye aha ụkpụrụ ± 0.1mm (Nha Panel Na-arụ ọrụ: 250*300mm)
Nkwenye Ndebanye aha mkpuchi mkpuchi ± 0.15mm
Nlekere ndebanye aha ihe nkpuchi solder ± 0.2mm
Ihe mkpuchi mkpuchi na PAD Enweghị mmetụta foto: 0.2mm
Ihe mmetụta foto: 0.1mm
Min.Solder Mask Dam 0.1mm
Nkwenye ndebanye aha na-ezighi ezi ± 0.30mm
maka Stiffener, Adhesive, Glue paper
Emecha elu elu Plating Ni / Au ;Chemical Ni / Au ;OSP

ngwaahịa 3306 (1)

ngwaahịa 3306 (2)

Anyị kwenyere na àgwà ahụ bụ mkpụrụ obi nke ụlọ ọrụ ma na-enye oge dị oke mkpa, nkà na ụzụ dị elu injinịa na mmepụta ọrụ maka ụlọ ọrụ eletrọnịkị.
Ogo ụda na-enweta aha ọma maka Fastline.Ndị ahịa na-eguzosi ike n'ihe ejiriwo anyị rụkọọ ọrụ ugboro ugboro na ndị ahịa ọhụrụ na-abịa na Fastline iji guzobe mmekọrịta mmekọrịta mgbe ha nụrụ banyere nnukwu aha.Anyị na-atụ anya ịnye gị ọrụ dị elu!

2.Production nkọwa nke Simple Mgbanwe PCB Board

high_power_led_pcb_1oz_copper_flex_pcb_circuit_board

QQ截图20161214174909

 

 

3.Ngwa nkeMpempe PCB na-agbanwe agbanwe

Anyị ejirila PCBA dị elu rụọ ọrụ n'ọtụtụ mba, site na ngwa eletrọnịkị ndị ahịa ruo na nkwukọrịta, ume ọhụrụ, ikuku ikuku, ụgbọ ala, wdg.

ngwaahịa4128

Ngwaahịa eletrọnịkị

ngwaahịa4137

Ụlọ ọrụ nkwukọrịta

ngwaahịa4133

Igwe ikuku

ngwaahịa4225

Njikwa mmepụta ihe

ngwaahịa4231

Onye nrụpụta ụgbọ ala

ngwaahịa4234

Ụlọ ọrụ ndị agha

4. Ikike nkeMpempe PCB na-agbanwe agbanwe

Anyị edobela ngalaba dị iche iche ebe onye nrụpụta ihe pụrụ iche ga-agbaso mmepụta iwu gị mgbe ịkwụ ụgwọ gị, iji zute mmepụta na mgbakọ pcb gị.
Anyị nwere n'okpuru iru eru iji gosi na anyị pcba.

ngwaahịa4627

5.Nleta ndị ahịa
ngwaahịa4649

6.Ngwugwu anyị

Anyị na-eji vacuum na katọn kechie ngwongwo ndị ahụ, iji hụ na ha niile nwere ike ịbịakwute gị kpamkpam.

ngwaahịa4757

7.Napụta na-eje ozi
Ị nwere ike ịhọrọ ụlọ ọrụ ọ bụla awara awara nke ị nwere na akaụntụ gị, ma ọ bụ akaụntụ anyị, maka ngwugwu dị arọ karị, mbupu ụgbọ mmiri ga-adịkwa.

ngwaahịa4929 ngwaahịa4928

ngwaahịa4932

Mgbe ị nwetara pcba, echefula ịlele ma nwalee ha,
Ọ bụrụ na nsogbu ọ bụla, nabata ịkpọtụrụ anyị!

8.FAQ
Q1: Ị bụ ụlọ ọrụ mmepụta ihe ma ọ bụ ụlọ ọrụ ahia?
A1: Anyị nwere PCB n'ichepụta & Mgbakọ factory.

Q2: Gịnị bụ kacha nta n'usoro nke ukwu?
A2: MOQ anyị abụghị otu dabere na ihe dị iche iche.A na-anabatakwa obere iwu.

Q3: kedu faịlụ anyị kwesịrị inye?
A3: PCB:Gerber faịlụ ka mma, ( Protel, ike pcb, PAD faịlụ), PCBA : Gerber faịlụ na BOM ndepụta.

Q4: Enweghị faịlụ PCB/GBR, naanị nwee ihe nlele PCB, ị nwere ike mepụta ya maka m?
A4: Ee, anyị nwere ike inyere gị aka imechi PCB.Naanị zitere anyị PCB sample, anyị nwere ike mechie PCB imewe wee rụpụta ya.

Q5: Kedu ozi ọ bụla ọzọ a ga-enye ma e wezụga faịlụ?
A5: Nkọwapụta ndị a chọrọ maka ngụpụta:
a) Ihe ndabere
b) Ọkpụrụkpụ osisi:
c) Ọkpụkpụ ọla kọpa
d) Ngwọta ihu:
e) agba nke ihe nkpuchi solder na silkscreen
f) Ọnụọgụ

Q6: Enwere m afọ ojuju mgbe m gụchara ozi gị, kedu ka m ga-esi malite ịzụ ahịa m?
A6: Biko kpọtụrụ anyị ahịa na homepage online, daalụ!

Q7: Gịnị bụ nnyefe okwu na oge?
A7: Anyị na-ejikarị okwu FOB na-ebuga ngwongwo na 7-15 ụbọchị ọrụ dabere na ọnụ ọgụgụ gị, nhazi.